During the 1850s and 1860s engineers carried out a piecemeal raising of the level of central Chicago. Streets, sidewalks and buildings were either built up, relocated, or physically raised on hydraulic jacks or jackscrews. The work was funded by private property owners and public funds.
Background
During the 19th century, the elevation of the Chicago area was not much higher than the shorelines of Lake Michigan, so for many years there was little or no naturally occurring drainage from the city surface. The lack of drainage caused unpleasant living conditions, and standing water harbored pathogens that caused numerous epidemics. Epidemics including typhoid fever and dysentery blighted Chicago six years in a row culminating in the 1854 outbreak of cholera that killed six percent of the city's population.
The crisis forced the city's engineers and aldermen to take the drainage problem seriously and after many heated discussions--and following at least one false start--a solution eventually materialized. In 1856, engineer Ellis S. Chesbrough drafted a plan for the installation of a city-wide sewerage system and submitted it to the Common Council, which adopted the plan. Workers then laid drains, covered and refinished roads and sidewalks with several feet of soil, and raised most buildings to the new grade with hydraulic jacks.
New City Moving Chicago Video
Earliest raising of a brick building
In January 1858, the first masonry building in Chicago to be thus raised--a four story, 70-foot (21 m) long, 750-ton brick structure situated at the north-east corner of Randolph Street and Dearborn Street--was lifted on two hundred jackscrews to its new grade, which was 6 feet 2 inches (1.88 m) higher than the old one, "without the slightest injury to the building." It was the first of more than fifty comparably large masonry buildings to be raised that year. The contractor was Bostonian engineer James Brown, who went on to partner with longtime Chicago engineer James Hollingsworth; Brown and Hollingsworth became the first and, it seems, the busiest building raising partnership in the city. Before the year was out, they were lifting brick buildings more than 100 feet (30 m) long, and the following spring they took the contract to raise a brick block more than twice that length again.
The Row on Lake Street
By 1860, confidence was sufficiently high that a consortium of no fewer than six engineers--including Brown, Hollingsworth and George Pullman--took on one of the most impressive locations in the city and hoisted it up complete and in one go. They lifted half a city block on Lake Street, between Clark Street and LaSalle Street; a solid masonry row of shops, offices, printeries, etc., 320 feet (98 m) long, comprising brick and stone buildings, some four stories high, some five, having a footprint taking up almost one acre (4,000 m2) of space, and an estimated all in weight including hanging sidewalks of thirty five thousand tons. Businesses operating out of these premises were not closed down for the lifting; as the buildings were being raised, people came, went, shopped and worked in them as if nothing out of the ordinary were happening. In five days the entire assembly was elevated 4 feet 8 inches (1.42 m) clear in the air by a team consisting of six hundred men using six thousand jackscrews, ready for new foundation walls to be built underneath. The spectacle drew crowds of thousands, who were on the final day permitted to walk at the old ground level, among the jacks.
The Tremont House
The following year a team led by Ely, Smith and Pullman raised the Tremont House hotel on the south-east corner of Lake Street and Dearborn Street. This building was luxuriously appointed, was of brick construction, was six stories high, and had a footprint taking up over 1-acre (4,000 m2) of space. Once again business as usual was maintained as this vast hotel parted from the ground it was standing on, and indeed some of the guests staying there at the time--among whose number were several VIPs and a US Senator--were completely oblivious to the feat as the five hundred men operating their five thousand jackscrews worked under covered trenches. One patron was puzzled to note that the front steps leading from the street into the hotel were becoming steeper every day and that when he checked out, the windows were several feet above his head, whereas before they had been at eye level. This huge hotel, which until just the previous year had been the tallest building in Chicago, was in fact raised fully 6 feet (1.8 m) without a hitch.
The Robbins Building
Another notable feat was the raising of the Robbins Building, an iron building 150 feet (46 m) long, 80 feet (24 m) wide and five stories high, located at the corner of South Water Street and Wells Street. This was a very heavy building; its ornate iron frame, its twelve-inch (305 mm) thick masonry wall filling, and its "floors filled with heavy goods" made for a weight estimated at 27,000 tons, a large load to raise over a relatively small area. Hollingsworth and Coughlin took the contract and in November 1865 lifted not only the building but also the 230 feet (70 m) of stone sidewalk outside it. The complete mass of iron and masonry was raised 27.5 inches (0.70 m), "without the slightest crack or damage."
Hydraulic raising of the Franklin House
There is evidence in primary document sources that at least one building in Chicago, the Franklin House on Franklin Street, was raised hydraulically by the engineer John C. Lane, of the Lane and Stratton partnership. These gentlemen had apparently been using this method of lifting buildings in San Francisco since 1853.
Relocated buildings
Many of central Chicago's hurriedly erected wooden frame buildings were now considered wholly inappropriate to the burgeoning and increasingly wealthy city. Rather than raise them several feet, proprietors often preferred to relocate these old frame buildings, replacing them with new masonry blocks built to the latest grade. Consequently, the practice of putting the old multi-story, intact and furnished wooden buildings--sometimes entire rows of them en bloc--on rollers and moving them to the outskirts of town or to the suburbs was so common as to be considered nothing more than routine traffic. Traveller David Macrae wrote incredulously, "Never a day passed during my stay in the city that I did not meet one or more houses shifting their quarters. One day I met nine. Going out Great Madison Street in the horse cars we had to stop twice to let houses get across." As discussed above, business did not suffer; shop owners would keep their shops open, even as people had to climb in through a moving front door. Brick buildings also were moved from one location to another, and in 1866, the first of these--a building of two and a half stories--made the short move from Madison Street out to Monroe Street. Later, many other brick buildings were rolled much greater distances across Chicago.
Are You Looking for Products
Here some products related to "Raising Of Chicago".
Home Services: Amazon Hom..
Newcomer's Handbook for M..
The Little Black Book of ..
The Little Black Book of ..
Get these at Amazon.com* amzn.to is official short URL for Amazon.com, provided by Bitly
Source of the article : here
EmoticonEmoticon